previous
Drapery Measurement Finder
What style of drape hanging header would you like?
Soft Top
No pleats on top. Apply for 4-in-1, Hook belt, Flat hook, Tab top, Rod pocket, and Back tab. Consider fullness for width.
Pleated
For a stuctured, modern look. Apply for Pinch pleat, Tailor pleat, Goblet, Inverted box pleated, Tape pleat, Triple pleat, Riple fold, Cylindrical goblet.
Grommets
For a stuctured, modern look.
Do you have a drapery rod installed already?
YES
I have a rod installed already.
NO
I don't have a rod installed yet.
(For more accurate measurement, we strongly recommend you have the rod or track installed)
What's your rod length?
Measure height to decide drapery length.
For soft top style ( tab top, 4-in-1, rod pocket, back tab ), the drapery length is measured from top of rod to floor.
For pleated and flat hook style, the curtain length is measured from rod ring eyelet or track ring eyelet to floor.
For grommet style, the length is measured from top of rod to floor.
Do you want single or split panels?
Single Panel
Split Panels
What kind of finished look would you like for your drapes?
Choose fullness based on that.
2.5X FULLNESS
Nicely gathered with soft fold on top. 2.5x Fullness strongly recommended.
2.2X FULLNESS
Nicely gathered with soft fold on top. 2.2x Fullness strongly recommended.
2X FULLNESS
Nicely gathered with soft fold on top. 2x Fullness strongly recommended.
1.8X FULLNESS
Nicely gathered with soft fold on top. 1.8x Fullness strongly recommended.
What kind of finished length would you like for your drapes?
1 inch ABOVE FLOOR
BREAK ON FLOOR
SLIGHT PUDDLE ON FLOOR
What's your window width? (Frame outer edge to edge.)
How many cm beyond your window frame would the rod extend?
Wider panels will be roughly 25-38 CM when kept stacked back—will be more for wide windows and doors.
What's the height from window top to floor?
How many cm above the window frame would you mount the rod?
(For pleated and flat hook style, please measure from rod ring eyelet or track runner eyelet to the window frame, which means you should take the hardware (rings/tracks) height into consideration)
To provide visual height to room, mount rod closer to ceiling line. In general, rods should be mounted at least 10-15 CM above window frame, if you have wall space.
What style of mount would you like?
Choose OneINSIDE MOUNT
OUTSIDE MOUNT
For inside mount, make sure your window frame depth is at least 2 cm for track to perfectly align with window frame.
What's your window width?
For accurate sizing, we recommend measuring in 3 location of the window.
What's you window height?
For accurate sizing, we recommend measuring in 3 location of the window.
All Done
Your recommended dimensions for your panel are