Choose Your Header Style for Existing Tracks
Hanging Header Style
Soft top
4- IN -1 Hanging Header
Versatile 4-in-1 construction: Hook Belt, Rod Pocket, Back Tab and Clip Ring. It works for rods with rings, rod with clip rings and pole.
Hook Belt: hang with metal pin hooks. (included)
Clip ring: hang with clip rings (not included)
Rod Pocket: hang with rod pocket for bunched-like look.
Back Tab: hang with back tab for pleated-like look.
Back Tab
- Tab height 10 cm. Pocket size 7.6 cm.
- 6 tabs per 100 cm width, 8 tabs for 130 cm width, 10 tabs for 180 cm width, 12 tabs for 215 cm width, 15 tabs for 255 cm width.
- Side hem 2.5 cm, bottom hem 8 cm.
- If rod length is 255 cm, order 200% fullness width for folds, then order 2 panels each 255 cm wide.
- It works for rod or rod with clip rings.
Rod Pocket
- Pocket 7.6 cm. Top flange is optional.
- Side hem 2.5 cm, bottom hem 8 cm.
- If rod length is 254 cm, consider 180% width for fullness, folds, order 2 panels each 190 cm wide.
- It works for rod or rod with clip rings.
Tab Top
- Tab height 10 cm, 6 tabs per 100 cm.
- Side hem 2.5 cm, bottom hem 8 cm.
- Curtain length is measured from the top of the pole to the floor.
- If rod length is 254 cm, consider fullness 180-250% width for folds, order 2 panels each 152-254 cm wide.
- Velcro tab top allows easy removal and installation, and it is optional for outdoor curtains or room dividers.
- It works for rod.
Hook Belt
- Adjustable plastic hooks 7.6 cm. 6 pin hooks per 102 cm width.
- Side hem 2.5 cm, bottom hem 10 cm.
- Measure length from the eye ring to the floor.
- If rod length is 254 cm, consider 180-250% fullness to order more width for folds, order 2 panels each 190-254 cm wide
- It works for rod with rings.
Hanging Header Style
Pleated style
Tailor Pleat
- Tailor pleats are more gathered than other headings and have permanent sewn-in pleats.
- Pleats space apart ranges from 14 cm to 16 cm.
- Panel width is the width that pleats already set. 180% fabric width is used for pleats.
- Metal pin hooks are not included. Only adjustable pin hooks are included.
- Length is measured from the eyelet ring where the curtain hooks are attached to floor.
- It works for the track, traverse rod, channel rod, and pole with rings.
Triple Tailor Pleat
- Triple tailor pleats are more gathered than other headings and have permanent sewn-in pleats.
- Pleats space apart 14 cm.
- Panel width is the width that pleats already set.
- Metal pin hooks are not included. Only adjustable pin hooks are included.
- Length is measured from the eyelet ring where the curtain hooks are attached to floor.
- It works for the track, traverse rod, channel rod, and pole with rings.
Pinch Pleat
- Pinch pleats are more gathered than other headings and have permanent sewn-in pleats for a more luxurious look. It is also called Double Pleated.
- It works for the track, traverse rod, channel rod, and pole with rings.
- Comes with adjustable plastic pin hooks.
Pinch Pleat with Back Tab
- A classic pleat pleat style with back tab.
- Normally, the tab height is 8 cm, fitting for rods with a diameter of 4 cm and below.
- Comes with adjustable plastic pin hooks.
- Can be hung on rings or rod directly. Pay attention to height measurement due to 2 different ways of hanging.
Triple Pleat
- Triple pleats are more gathered than pinch pleats and have permanent sewn-in pleats for a more luxurious look.
- Pleats space apart 14 cm.
- Length is measured from the eyelet ring where the curtain hooks are attached to floor.
- If rod or track length is 254 cm, then order 1 panel 254 cm width or 2 panels each 127 cm width.
- It works for the track, traverse rod, channel rod, and pole with rings.
- Comes with adjustable plastic pin hooks.
Goblet
- Goblet pleats are more gathered than other headings and have permanent sewn-in pleats.
- Pleats space apart 14 cm.
- Panel width is the width that goblet pleats already are made. 180% fabric width is used for pleats.
- Length is measured from the eyelet ring where the curtain hooks are attached to floor.
- It works for the track, traverse rod, channel rod, and pole with rings.
Inverted Box Pleat
- It is formed by two equal folds of fabric folded toward one another so they meet at the center of the pleat on the front of the fabric. It is what a box pleat looks like from behind.
- Pleats space distance 13cm.
- Measure length from the eye ring to the bottom. Rod rings are not included, which are purchased separately.
- If rod length is 254 cm, order 2 panels each 127 cm width.
- It works for rods with rings and track.
Pencil Pleat Tape
- Pencil Pleat Tape with traditional pleats and parallel folds that are formed uniformly, in the same size, when the cords are pulled.
- Pencil pleat tape for curtains in the home, various spaces and net curtains.
Hanging Header Style
Grommet
Grommet
- Inside diameter 4 cm, outside diameter 6 cm.
- 6 grommets for 110 cm wide, 8 for 130 cm, 10 for 185 cm, 12 for 215 cm, 14 for 255 cm, 16 for 305 cm, 22 for 380 cm, 26 for 460 cm.
- Side hem 2.5 cm, bottom hem 8 cm.
- 4 Grommet Colors : Antique bronze, Nickel, Black, Aluminum (outdoor curtain for rustproof)